Selection tables

Agronomy Specs

Technical selection tables for irrigation, RAS makeup water, greenhouse fertigation and related machinery interfaces — written so procurement and agronomy teams can compare duty points before a dealer visit.

Core selection matrix

Use these windows as shortlist filters. Final layouts still require soil texture, elevation lift and water quality samples.

System family Primary duty metrics Boundary conditions Acceptance evidence
Center pivot 15–125 hp drive / pump; 250–1,200 gpm; 400–1,800 ft working width Field geometry, soil intake rate, end-gun overlap limits Nozzle chart + tower amp log + uniformity sample
Drip / micro irrigation 0.2–0.6 gph emitters; 8–25 psi zone pressure; 120–200 mesh filtration Water silt load, root zone depth, frost-protection overlays Pressure map + filter differential log
Fertigation package 0.5–5.0 gph injection; dual EC/pH probes; chemigation valve class Controller pulse resolution, fertilizer solubility, EPA / local rules Dose worksheet + alarm threshold sheet
Greenhouse (Venlo) Bench / hanging line flow; shade-screen skip logic; recipe EC targets Crop recipe changes, humidity spikes, water storage volume Daily recipe log + probe calibration stamp
RAS makeup water 180–320 gpm typical makeup; VFD ramp profiles; biofilter inlet pressure band Fingerling stocking weeks, protein skimmer duty, discharge permits Pressure band report + spare seal staging list

Decision note: drip irrigation vs center pivot

Buyers often ask which system “uses less water.” That question is incomplete. Drip irrigation usually wins on water-use efficiency for orchards and high-value row crops when labor and filtration maintenance are available. Center pivot packages usually win on labor intensity for large rectangular or circular fields when tower access and power quality are stable.

Choose drip when

Root zones are discrete, silt can be filtered to 120–200 mesh, and crews can walk laterals weekly. Emitter rates of 0.2–0.6 gph and zone pressures of 8–25 psi should be acceptance-checked before planting, not after the first heat wave.

Choose center pivot when

Field geometry supports 400–1,800 ft working width, design flow sits between 250–1,200 gpm, and operators prefer fewer man-hours per irrigated acre. End-gun duty and soil intake rate still must pass uniformity sampling — a pivot is not automatically “set and forget.”

Neither option removes the need for water quality samples. Surface water with high silt load can clog drip tape and foul pivot nozzles; both paths need filtration class documented on the selection sheet.

Specification checklist before RFQ

  • Irrigated acres and field geometry sketch
  • Water source quality (silt, EC, well lift)
  • Target crop ET / recipe windows
  • Fertigation yes/no and fertilizer types
  • Preferred controller / telemetry constraints
  • Dealer territory and commissioning week
  • Spare kit classes required on-site
  • Buyer audit needs (GLOBALG.A.P., ISO packets)

Limitation note: published ranges are selection filters, not guarantees of yield. Soil variability, operator training and power quality still govern field results after commissioning.

Request a filled Agronomy Specs pack

We return editable tables with your duty points, acceptance checks and spare staging list.

Request Spec Pack